Lettore UHF RFID definitivo – LGHC66

Descrizione

LGHC66 UHF è il lettore RFID definitivo, altamente sensibile con una portata di lettura fino a 30 m. LGHC66 UHF (integrato) è un lettore leggero delle dimensioni di un telefono, progettato per applicazioni a breve distanza. Entrambi supportano Impinj Gen2X per prestazioni RFID migliorate. Inoltre, sono dotati di Android 11/13, processore Qualcomm octa-core, ampio schermo da 5,5”, batteria ad alta potenza, fotocamera da 13 MP e scansione di codici a barre opzionale.

 

DATI TECNICI

Performance

• CPU Octa-core, 2.0 GHz
• RAM+ROM
  • 3 GB + 32 GB
  • 4 GB + 64 GB (optional)
  • 6 GB + 128 GB (optional)
• Expansion Supports up to 256 GB Micro SD (TF) card

Communication

• WLAN Support 802.11 a/b/g/n/ac/ax-ready/d/e/h/i/k/r/v,2.4G/5G dual-band, IPV4, IPV6, 5G PA;
• Fast roaming: PMKID caching, 802.11r, OKC;
• Operating Channels: 2.4G(channel 1~13), 5G(channel36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165),Depends on local regulations;
• Security and Encryption: WEP,WPA/WPA2-PSK(TKIP and AES),WAPI- PSK—EAP-TTLS,EAP-TLS, PEAP-MSCHAPv2, PEAP-LTS,PEAP-GTC, WPA3-Enterprise,etc.

• WWAN (Europe, Asia)
  • 2G: 850/900/1800/1900 MHz
  • 3G: CDMA EVDO: BC0
  • WCDMA: 850/900/1900/2100MHz
  • TD-SCDMA: A/F(B34/B39)
  • 4G: B1, B3, B5, B7, B8, B20, B38, B39, B40, B41
• WWAN (America)
  • 2G: 850/900/1800/1900 MHz
  • 3G: 850/900/1900/2100 MHz
  • 4G:B2/B4/B5/B7/B8/B12/B13/B17/B28A/B28B/B38
• Bluetooth Bluetooth 5.1
• Vo-LTE Support Vo-LTE HD video voice call
• GNSS GPS/AGPS, GLONASS, BeiDou, Galileo, internal antenna

Physical Characteristics

• Dimensions 160.0 x 76.0 x 15.5 mm / 6.3 x 2.99 x 0.61 in.
• Weight
  • 657 g / 23.17 oz. (with battery, UHF 1, UHF back clip);
  • 798 g / 28.15 oz. (with battery, UHF 2, C66+R6);
  • 297 g / 10.47 oz. (with battery, UHF 3, Built-in UHF)
• Display 5.5-inch high-definition full display (18:9) , IPS 1440 x 720
• Battery Removable main battery (normal version:4420 mAh ; with fingerprint / built-in UHF / volume measurement version: 5200mAh)
  • 5200 mAh optional pistol battery, support QC3.0 and RTC
  • Standby: up to 490 hours (only main battery ; WiFi: up to 470h; 4G: up to 440h)
  • Continuous use: over 12 hours (depending on user environment)
• Charging time: 2.5 hours (charge device by standard adaptor and USB cable)
• Touch Panel Multi-touch panel, gloves and wet hands supported
• Notification Sound, LED indicator, vibrator
• Interfaces USB Type-C, USB 3.1, OTG, extended thimble;
• Card slot 1 slot for Nano SIM card, 1 slot for Nano SIM or TF card
• Audio 2 microphones，1 for noise cancellation; 1 speaker; receiver
• Keypad 1 power key, 2 scan keys, 2 volume keys
• Sensors Accelerometer sensor, light sensor, proximity sensor, gravity sensor

Developing Environment

• Operating System Android 11/13; GMS, 90-day security updates, Android Enterprise, Zero-Touch, FOTA, Soti MobiControl, SafeUEM supported. Committed support for a future upgrade to Android 18 pending feasibility
• SDK Chainway Software Development Kit
• Language Java
• Tool Eclipse / Android Studio

User Environment

• Operating Temp. -20 ℃~+50 ℃
• Storage Temp. -40 ℃~+70 ℃
• Humidity 5% RH – 95% RH non condensing
• Drop Specification
  • Multiple 1.8 m / 5.91 ft. drops (at least 20 times) to the concrete across the operating temperature range;
  • Multiple 2.4 m / 7.87 ft. drops (at least 20 times) to the concrete after installed rubber boot
• Tumble Specification 1000 x 0.5 m / 1.64 ft. falls at room temperature
• Sealing IP65 per IEC sealing specifications
• ESD ±15 KV air discharge, ±8 KV conductive discharge

Data Collection

• Camera Rear 13 MP Autofocus with flash
• Facial Recognition lSO19794-5 Compatible

UHF

• Engine CM710-1 module based on Impinj E710
• Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
• Impinj Gen2X Supported
• Protocol EPC C1 GEN2 / ISO18000-6C, supports GS1 EPC Gen2v2 Authenticate and ISO/IEC 29167-11
• Antenna Circular Polarized Antenna (4dBi)
• Power
  • 1W (30dBm, +5 dBm to +30 dBm adjustable)
  • 2W Optional (33dBm, for Latin America, etc.)
• Max Read Range
  • 28m (Impinj MR6 tag, size 70 x 15mm)
  • 28m (Impinj M750 tag, size 70 x 15mm)
  • 32m (Alien H3 Anti-Metal tag, size 130 x 42mm)
• Fastest Read Rate 1300+ tags/sec
• Communication Mode Pin Connector

Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment.

NFC (Optional)

• Frequency 13.56 MHz
• Protocol ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
• Chips M1 card (S50, S70), CPU card, NFC tags, etc.
• Range 2-4 cm

Barcode Scanning (Optional)

• 2D Scanner Zebra: SE4710 / SE2100; Honeywell: N6603; E3200; IA166S; CM60
• 1D Symbologies UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
• 2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX),etc.

Accessories

Separate handle with one button;
Handle + battery (handle battery 5200mAh, one button);
UHF back clip + handle (5200mAh, one button);
Wrist Strap; Rubber Bumper; Charging Cradle